Electronic Component Testing
LCR Meters are electronic test equipment used to measure the inductance (L), capacitance (C) and resistance (R) of an electronic component.When there is a change in the current flowing through a conductor, a corresponding change is induced in the voltage in it and in conductors surrounding it. This property is known as inductance. The ability of a body or a conductor to store electrical charge is known as capacitance. The opposition that a conductor offers to passaging electric current through it is called resistance.Most LCR meters use AC signals to measure the impedance of components. When using an LCR meter make sure you are using the correct settings as the wrong settings can cause poor measurement accuracy. Both analogue and digital LCR meters are available. The analogue is less expensive, and the digital variety are seen to be more accurate.What are the uses of an LCR Meter?A digital LCR meter is used to measure the impedance flowing through a Device Under Test (DUT). It measures the voltage (V) across it, the current (I) flowing through it, and the phase angle between current and voltage. Subsequently, you can determine all the impedance parameters from these three factors.Thus, an LCR meter measures the following parameters related to a circuit:InductanceCapacitanceResistanceDissipation factorQuality factorCurrentVoltagePhase angle between the current and voltageConductanceWhat are the types of LCR Meters?Handheld LCR meters: Small, lightweight and portable. They have multiple test frequency and the data it captures can be transferred to a PC via a USB port. Typically used in field operations.Benchtop LCR meters: Big and bulky. They can be operated on programmable frequencies and can be controlled via a computer.Techniques used with LCR MetersBridge Method: This method is used for measuring frequencies below 100 kHz.LCR Measurement by Current-Voltage Technique: Using this method, the LCR measurement of a component is done by measuring the current and voltage. Then the impedance values are found out from these two quantities.
Showing 1–24 of 36 results
-
PORTABLE LINEAR/ANALOGUE IC TESTER
IDR0.00 -
DELUXE UNIVERSAL LCR METER
IDR7,753,783.47 -
UNIVERSAL LCR METER
IDR5,792,969.81 -
U1782B SMD TWEEZER FOR LCR METER 815MM
IDR2,076,822.00 -
U1732C LCR METER, HANDHELD, 20000 COUNT
IDR7,122,031.00 -
HANDHELD LCR METER
IDR1,973,820.02 -
Peak DCA55 Component Tester Component, Model DCA55
IDR1,196,899.79 -
5 DECADES BOX
IDR3,388,681.23 -
RM6-N2 COMPACT 6 DECADE RESISTANCE BOX
IDR6,328,433.26 -
ideal-tek ST-LED Component Tester Component
IDR3,287,777.05 -
LCR55A: LCR METER
IDR5,559,170.00 -
Peak Electronic Design ESR70 Handheld LCR Meter 22mF, 4 MΩ
IDR3,537,100.58 -
U1733C LCR METER, HANDHELD, 20000 COUNT
IDR8,139,464.00 -
100 KHZ HANDHELD LCR METER
IDR11,389,480.65 -
LOW OHM METER,0.001 - 200 OHM
IDR20,239,889.07 -
7 DECADES BOX
IDR5,060,522.94 -
Cropico DO4002 AA Ohmmeter, Maximum Resistance Measurement 400 Ω, Resistance Measurement Resolution 1μΩ, Measurement
IDR19,139,383.19 -
Time Electronic Resistance Decade Box, Resistance Resolution 1Ω, Absolute Maximum Resistance Measurement 100MΩ
IDR22,056,478.98 -
DIGITAL MICROHMMETER
IDR58,159,931.65 -
DECADE RESISTANCE BOX, 6 DECADES
IDR28,089,017.55 -
DIGITAL LOW RESISTANCE10A MICRO-OHMMETER
IDR78,616,943.02 -
Megger DLR010X Rechargeable NiMH Ohmmeter, Maximum Resistance Measurement 2000 Ω, Resistance Measurement Resolution
IDR99,208,528.26 -
1051 8 DECADE-THUMB WHEEL RESISTANCE BOX
IDR20,625,254.93 -
ON-SITE MICRO OHMMETER
IDR75,191,445.40
